FRP Recycling Equipment

Full System

 

FRP Green HomeAbout FRP GreenContact FRP Green

Full System

The full system is referred to as the recycling and dry additive system which comprises two parts:

  1. A grinder / muncher machine, similar to a hammer mill
  2. A 'macerator' which is a metering and transportation attachment for conveying recycled fibreglass to a fiberglass spray gun / chopper.

The grinder / muncher has been constructed to withstand fiberglass abrasion at a low temperature at the same time as sustaining the fibers’ integrity for effective reuse.

EFFECTIVE DISPENSING IS KEY

After the recyclate has been reduced to a predetermined fiber size the next step is to use the ECO-WOLF, INC 'Macerator' Dry Additive System. The metering and transportation attachment is air powered and enables recycled FRP/GRP to be used with pre-existing spray up machinery. In addition, we offer an additional dispense unit for natural fiber additives.

 

FULL SYSTEM - EQUIPMENT

  • Grinder / muncher
  • ECO-WOLF INC 'Macerator' Dry Additive System
  • No Roll™ Formulation (complimentary to the Full System)

 

ECO-WOLF, iNC's GRINDERS / MUNCHERS are available in the following sizes:

  • 12" Grinder* - 11"x12" Top Feed Opening with 30 HP motor; approx.400 kg/hr output    
  • 24" Grinder* - 11"x24" Top Feed Opening with 30 HP motor; approx.800 kg/hr output
  • 24" Grinder* - 11"x24" Top Feed Opening with 40 HP motor; approx.800 kg/hr output 
  • 24" Grinder* - 11"x24" Top Feed Opening with 50 HP motor; approx.800 kg/hr output
     

The ECO-WOLF, INC 'MACERATOR' DRY ADDITIVE SYSTEM consists of:

  • A hopper
  • metering device
  • dry injector; adaptable to existing spray equipment

 

'NO ROLL' is a proprietary formula that reduces the amount of 'consolidation' (use of rollers for removing air bubbles) during the layup process. At least 80% reduction in the need for roll-out labour through the use of our No-Roll™ formulation.

 

Contact us for a quote